Product Description

SWC Sequence-Medium-Responsibility Patterns Cardan shaft

Styles

Information and Measurements of SWC Collection Universal Joint Couplings

Variety Layout
Info
Merchandise
SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 one thousand 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 one hundred 120 a hundred and forty one hundred forty one hundred forty a hundred and forty one hundred forty one hundred fifty a hundred and seventy one hundred ninety 190 240 250
M(kg) 65 83 one hundred fifteen 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 a hundred 1571 1130 1340 1400 1520
M(kg) forty four 60 85 one hundred ten a hundred and sixty one hundred eighty 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg) 35 48 sixty six 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg) forty eight sixty five ninety 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV a hundred 100 120 one hundred forty 140 140 a hundred and forty one hundred forty a hundred and fifty a hundred and seventy 190 one hundred ninety 240 250
M(kg) 70 ninety two 126 a hundred sixty five 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m) sixteen 22.four 31.5 forty sixty three eighty 90 one hundred twenty five a hundred and eighty 250 355 500 710 one thousand
  TF(kN·m) eight 11.2 sixteen 20 31.five forty 45 63 90 one hundred twenty five a hundred and eighty 250 355 500
  Β(°) 15 fifteen fifteen 15 15 fifteen 15 fifteen fifteen 15 15 fifteen fifteen 15
  D 160 one hundred eighty two hundred 225 250 265 285 315 350 390 440 490 550 620
  Df a hundred and sixty one hundred eighty two hundred 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 one hundred fifty five a hundred and seventy 196 218 233 245 280 310 345 390 435 492 555
  D2(H9) a hundred 105 120 a hundred thirty five 150 160 a hundred and seventy 185 210 235 255 275 320 380
  D3 108 114 a hundred and forty 159 168 180 194 219 245 273 299 325 402 426
  Lm ninety five one zero five 110 a hundred twenty five one hundred forty 150 a hundred and sixty one hundred eighty 195 215 260 270 305 340
  K 16 seventeen 18 20 25 twenty five 27 32 35 40 forty two forty seven 50 55
  T 4 five five 5 six 6 7 eight eight 8 ten 12 twelve 12
  N 8 eight eight eight eight 8 eight 10 ten 10 sixteen 16 16 16
  D 15 17 17 seventeen 19 19 21 23 23 25 28 31 31 38
  B twenty 24 32 32 forty forty forty 40 50 70 eighty 90 100 a hundred
  G six. seven. 9. nine. twelve.five 12.five twelve.five 15. sixteen. eighteen. twenty. 22.5 22.5 25
  MI(Kg) 2.fifty seven 3 three.85 3.85 5.seventeen six six.seventy five 8.twenty five 10.six thirteen 18.fifty 23.75 29.twelve 38.08
  Measurement M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm) 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170

1. Notations: 
L=Standard length, or compressed length for designs with length compensation 
LV=Length compensation 
M=Weight 
Tn=Nominal torque(Yield torque 50% over Tn) 
TF=Fatigue torque, I. E. Permissible torque as determined according to the fatigue strength
Under reversing loads 
β=Maximum deflection angle 
MI=weight per 100mm tube
2. Millimeters are used as measurement units except where noted 
three. Please consult us for customizations regarding length, length compensation and
Flange connections. 
(DIN or SAT etc. )

Material: Alloy Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Customization:
Available

|


###

Type Design
Data
Item
SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 1000 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 65 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 100 1010 1130 1340 1400 1520
M(kg) 44 60 85 110 160 180 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg) 35 48 66 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg) 48 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 70 92 126 165 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m) 16 22.4 31.5 40 63 80 90 125 180 250 355 500 710 1000
  TF(kN·m) 8 11.2 16 20 31.5 40 45 63 90 125 180 250 355 500
  Β(°) 15 15 15 15 15 15 15 15 15 15 15 15 15 15
  D 160 180 200 225 250 265 285 315 350 390 440 490 550 620
  Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 155 170 196 218 233 245 280 310 345 390 435 492 555
  D2(H9) 100 105 120 135 150 160 170 185 210 235 255 275 320 380
  D3 108 114 140 159 168 180 194 219 245 273 299 325 402 426
  Lm 95 105 110 125 140 150 160 180 195 215 260 270 305 340
  K 16 17 18 20 25 25 27 32 35 40 42 47 50 55
  T 4 5 5 5 6 6 7 8 8 8 10 12 12 12
  N 8 8 8 8 8 8 8 10 10 10 16 16 16 16
  D 15 17 17 17 19 19 21 23 23 25 28 31 31 38
  B 20 24 32 32 40 40 40 40 50 70 80 90 100 100
  G 6.0 7.0 9.0 9.0 12.5 12.5 12.5 15.0 16.0 18.0 20.0 22.5 22.5 25
  MI(Kg) 2.57 3 3.85 3.85 5.17 6 6.75 8.25 10.6 13 18.50 23.75 29.12 38.08
  Size M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm) 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170
Material: Alloy Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Customization:
Available

|


###

Type Design
Data
Item
SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 1000 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 65 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 100 1010 1130 1340 1400 1520
M(kg) 44 60 85 110 160 180 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg) 35 48 66 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg) 48 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 70 92 126 165 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m) 16 22.4 31.5 40 63 80 90 125 180 250 355 500 710 1000
  TF(kN·m) 8 11.2 16 20 31.5 40 45 63 90 125 180 250 355 500
  Β(°) 15 15 15 15 15 15 15 15 15 15 15 15 15 15
  D 160 180 200 225 250 265 285 315 350 390 440 490 550 620
  Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 155 170 196 218 233 245 280 310 345 390 435 492 555
  D2(H9) 100 105 120 135 150 160 170 185 210 235 255 275 320 380
  D3 108 114 140 159 168 180 194 219 245 273 299 325 402 426
  Lm 95 105 110 125 140 150 160 180 195 215 260 270 305 340
  K 16 17 18 20 25 25 27 32 35 40 42 47 50 55
  T 4 5 5 5 6 6 7 8 8 8 10 12 12 12
  N 8 8 8 8 8 8 8 10 10 10 16 16 16 16
  D 15 17 17 17 19 19 21 23 23 25 28 31 31 38
  B 20 24 32 32 40 40 40 40 50 70 80 90 100 100
  G 6.0 7.0 9.0 9.0 12.5 12.5 12.5 15.0 16.0 18.0 20.0 22.5 22.5 25
  MI(Kg) 2.57 3 3.85 3.85 5.17 6 6.75 8.25 10.6 13 18.50 23.75 29.12 38.08
  Size M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm) 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170

Power Take-Off (PTO) Shafts

Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.

Power take-off (PTO) shaft

Shaft CollarThe power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.

Types

There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.

Connections

Shaft CollarA PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.

Safety

It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.

Maintenance

Shaft CollarOne of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
China Shafts/Cardan Shafts /Pto Shafts for Rubber Machinery/Steel Rolling Mills/Steel Pipe Equipment     pto shaft came apartChina Shafts/Cardan Shafts /Pto Shafts for Rubber Machinery/Steel Rolling Mills/Steel Pipe Equipment     pto shaft came apart
editor by CX 2023-03-28