Sort: Farm Tools
Use: Raking and tedding straw, grass
Model Variety: RXHR2500
Condition: New
Soon after-product sales Provider Presented: Engineers available to service equipment abroad
Certification: CE ISO
Raking Width: 2500mm
Tedding Width: 1600mm
G.W.: 160kg
Teeth Figures: 12
Tractor electricity: eighteen-50hp
Packaging Details: Iron crate with plastic movie
Port: HangZhou
Merchandise Applicationone.As a tedder: it can distribute and flip the inexperienced-cut materials and withdraws, for drying evenly.1). Distribute, swath or windrow so crops dry down quicker,2). Tailor your tedding functions to a range of crops and conditions by various PTO pace or tine situation, Reduced noisy 6-24V mini DC Brush Reducer Motor WIth Reduction Gearbox, Electric powered Reduce Speed Motor For Household 3). Fixed-tine situation provides aggressive tedding and is ideal for use in refreshing-cut content or crops where leaf and shatter losses are not a concern4).Cam-operated tine place makes it possible for the tine bar rollers to comply with the cam track to elevate and launch crop carefully and preserve worthwhile leaves2.As a rake: it can gather teh dried components into strains fro balers to select up and pack them.1). Specific raking motion makes fluffy, uniform windrows that dry evenly2). Self-centering wheels offer extral maneuverability by enabling you to make sharp turns and again up very easily without lifting the equipment.
| SPECIFICATIONS FOR HAY RAKE RXHR2500 | |||
| Model | RXHR2500 | ||
| Raking width | 2500mm | ||
| Tedding width | 1600mm | ||
| Dimensions | 2100x2500x950mm | ||
| Teeth No.s | 12 | ||
| Working speed | 4-8km/h | ||
| Matched Electrical power | 18-50HP | ||
| PTO velocity | 540rpm | ||
| Packaging dimension | 2100x1950x950mm | ||
Main Attributes1.Sturdy, rugged body offers years of dependable functionality.
2.Rotor tilt can be modified effortlessly with a practical crank for highest crop dealing with.3.Torque limiting clutch on the large-responsibility PTO gives overload defense. PTO speed is variable, so you can match ground speed to crop and subject situations.4.Three wheel-top placement enable you alter for different crops, problems and functions.5.Vertical tines select up much less stones and considerably less debris than horizontal tines for cleaner tedding and raking.6.Cam keep track of adjustment permits you to speedily tailor tedding/raking action to various crops and problems without having equipment.7.Handy jack simplifies a few-stage hitch arrangements.8.one machine, AMEC one cylinder diesel motor ZS1115 ZS1125 ZS1130 spare elements fuel nozzle for sale 3 capabilities, tedding, raking, and reversing multi-featuresCertificationsDetailed ImagesHay Rake elementsName: Adjusting PlateBrand: RUNSHINEOriginal: ChinaBy modifying the plate, the device can be utilised as a raker or a tedder.
Hay Rake FeaturesIdentify: structure Manufacturer: RUNSHINE Unique: ChinaStrictly rust cleansing, Agriculture Resources five hundred Working Hours Gasoline Generator Ip70 Lawn Mower Recoil Starter With Cup For Diesel Engine Parts beautiful physical appearance
Hay Rake AreasName: Pushed systemBrand: RUNSHINEOriginal: China PTO speed: 540rpm
Hay Rake AttributesName: Protector Brand: RUNSHINEOriginal: ChinaHigh good quality parts,lengthy working existence.
Our ServicePre-Income Support* Inquiry and consulting assist. * Sample testing help. * View our Factory.* Innovative technological innovation, rigorous tests management.
Following-Income Support* Education how to instal the equipment, training how to use the device. * Engineers accessible to support equipment overseas.* Ample sparts in ware property.* Rapid response, quickly motion in distinguishing and sending spare areas by DHL.
Packing & forging areas agricultural products CZPT DC70 DC93 DC95 DC105 XIHU (WEST LAKE) DIS. CRAWLER DRIVING WHEEL THRUST Monitor SHOE Equipment SHAFT Supply
| Packaging | |
| Measurement | 1350(L) * seven hundred (W) * 700(H)/ set |
| Fat | 200kg |
| Packaging Specifics | Iron crate with plastic movie. |
| Packaging | |
| Dimensions | 1350(L) * seven hundred(W) * 2600(H)/5sets |
| Fat | 1000kg |
| Packaging Information | Iron crate with plastic film. |
Our CompanyRelated ProductsMini Spherical Baler
Drum Mower
Bale Wrapper
Internet Binding Spherical Baler91.8% Reaction Charge
Twine Square Balerninety one.8% Response Charge
Diesel Wooden Chipperninety one.8% Response Fee
| SPECIFICATIONS FOR HAY RAKE RXHR2500 | |||
| Model | RXHR2500 | ||
| Raking width | 2500mm | ||
| Tedding width | 1600mm | ||
| Dimensions | 2100x2500x950mm | ||
| Teeth No.s | 12 | ||
| Working speed | 4-8km/h | ||
| Matched Power | 18-50HP | ||
| PTO speed | 540rpm | ||
| Packaging size | 2100x1950x950mm | ||
###
| Packaging | |
| Size | 1350(L) * 700 (W) * 700(H)/ set |
| Weight | 200kg |
| Packaging Details | Iron crate with plastic film. |
###
| Packaging | |
| Size | 1350(L) * 700(W) * 2600(H)/5sets |
| Weight | 1000kg |
| Packaging Details | Iron crate with plastic film. |
Drive shaft type
The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are three main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
tube yoke
Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
end yoke
If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join two heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new one or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.
